🖨️ Print Shop
AMS Lite Top Mount for A1 & A2L

This is the component set by Bambu Lab for the A1&A2L printer. The AMS lite Top Mount setup is a tested solution for mounting the AMS lite on top of the A1&A2L printer. The component set consists of two main modules: Top Mount Bracket (For both A2L & A1) Z-Axis Stiffener(Only for A1) The Top Mount Bracket is meticulously designed to be tilted to the front for better balance. Additionally, the upper half of the bracket can spin left and right, providing easier access to the back spools. The Z-axis Stiffener is designed to dampen back-and-forth printer movements. Thanks to the special elastic damper design at the bottom, there is minimum wobble even when printing in ludicrous speed with AMS lite fully loaded. Assembly Installation guides for different printer models are available at the links below: A1: https://wiki.bambulab.com/en/a1/manual/ams-lite-top-mount-tutorial A2L: https://wiki.bambulab.com/en/a2l/manual/a2l-ams-connection-guide Here is a tutorial video for the installation: You can also buy the required hardware as a kit from here: http://store.bambulab.com/products/ams-lite-top-mount-screws-kit

AMS Lite Top Mount for A1 & A2L

by Bambu Lab · original on MakerWorld ↗

♥ 35.5k⬇ 168.4k🖨 139.7k prints

License: BY-NC-SAa1ams lite 置顶方案top mountspace savingutilitymodams litea2l

Print profiles

  • A1 mini Top Mount for A1 0.2mm layer, 2 walls, 15% infillIN STOCK

    ⏱ 7h 9m · 227 g · 1 material(s)

    Prints on: A1 mini 0.4, X1 0.4, A2L 0.4, H2D 0.4, H2C 0.4, A1 0.4, X2D 0.4, H2S 0.4, P1P 0.4, X1E 0.4, P2S 0.4, H2D Pro 0.4, X1 Carbon 0.4, P1S 0.4PLA

    Order this print

  • A1 mini Big feet,0.2mm layer, 2 walls, 15% infill

    ⏱ 8h 5m · 346 g · 1 material(s)

    Prints on: A1 mini 0.4, X1 0.4, P1S 0.4, A1 0.4, H2C 0.4, A2L 0.4, H2S 0.4, H2D Pro 0.4, X1E 0.4, H2D 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4PLA

    Not in stock

  • PET-G Mechanical Pieces - 0.2mm layer, 2 walls, 15% infill

    ⏱ 16h 7m · 571 g · 3 material(s) · needs AMS

    Prints on: A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPETG

    Not printable on our printers

  • A1 top mount AMS Lite from X1C Gyroid Fill

    ⏱ 16h 38m · 549 g · 2 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, H2D Pro 0.4, H2C 0.4, X1 0.4, P1S 0.4, A2L 0.4, A1 0.4, X1E 0.4, P1P 0.4, P2S 0.4, H2S 0.4, H2D 0.4, X2D 0.4PLA-CFPLA-CF

    Not printable on our printers

  • 0.2mm layer, 2 walls, 15% infill w/ Screws Horizontal @100%

    ⏱ 15h 9m · 565 g · 1 material(s)

    Prints on: A1 0.4, H2C 0.4, A2L 0.4, H2S 0.4, H2D Pro 0.4, H2D 0.4, P2S 0.4, X2D 0.4PLA

    Not printable on our printers

  • AMS Lite Top Mount Screw - Shortened

    ⏱ 42m · 6 g · 1 material(s)

    Prints on: A1 0.4, P2S 0.4, X2D 0.4, P1S 0.4, H2D Pro 0.4, A2L 0.4, X1 Carbon 0.4, P1P 0.4, X1E 0.4, A1 mini 0.4, X1 0.4, H2S 0.4, H2C 0.4, H2D 0.4PETG

    Not in stock

  • thicker damper

    ⏱ 28m · 4 g · 1 material(s)

    Prints on: A1 0.4, A2L 0.4, P1P 0.4, H2C 0.4, A1 mini 0.4, P2S 0.4, H2S 0.4, X2D 0.4, P1S 0.4, H2D 0.4, X1 0.4, X1 Carbon 0.4, H2D Pro 0.4, X1E 0.4PETG

    Not in stock

  • Added Scraper Holder

    ⏱ 15h 38m · 584 g · 2 material(s) · needs AMS

    Prints on: A1 0.4, H2D Pro 0.4, H2C 0.4, P2S 0.4, A2L 0.4, H2S 0.4, H2D 0.4, X2D 0.4PLAPLA

    Not printable on our printers

  • 0.2mm, Less material, faster print, higher strength

    ⏱ 14h 9m · 521 g · 1 material(s)

    Prints on: A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLA

    Not printable on our printers

  • PLA + PETG - improved strength and supports (see details)

    ⏱ 17h 8m · 585 g · 2 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, X1 0.4, A2L 0.4, H2D 0.4, H2C 0.4, A1 0.4, H2S 0.4, P1P 0.4, X1E 0.4, H2D Pro 0.4, P2S 0.4, P1S 0.4, X2D 0.4PLAPETG

    Not printable on our printers

  • PLA_SPEED_&_STRENGHT_OPTIMIZED_0.28mm, 3 walls, 10% infill

    ⏱ 14h 56m · 584 g · 1 material(s)

    Prints on: A1 0.4, H2S 0.4, H2D Pro 0.4, H2D 0.4, A2L 0.4, H2C 0.4, P2S 0.4, X2D 0.4PLA

    Not printable on our printers

  • Zahlen der Feederführung richtig zugeordnet

    ⏱ 1h 8m · 20 g · 2 material(s) · needs AMS

    Prints on: A1 0.4, X1 Carbon 0.4, H2C 0.4, H2D Pro 0.4, X1 0.4, P1S 0.4, A2L 0.4, X2D 0.4, P1P 0.4, X1E 0.4, P2S 0.4, H2S 0.4, A1 mini 0.4, H2D 0.4PLAPLA

    Not in stock

  • Removed Grid infill PLA-CF 0.2mm layer, 2 walls, 15% infill

    ⏱ 13h 60m · 534 g · 2 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, A1 0.4, H2C 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, H2S 0.4, P1S 0.4, H2D 0.4, A2L 0.4, X2D 0.4PLA-CFPLA

    Not printable on our printers

  • 搭配小智AI智能体底座

    ⏱ 12h 45m · 348 g · 1 material(s)

    Prints on: P1S 0.4, X1 Carbon 0.4, H2D Pro 0.4, H2C 0.4, X1 0.4, A2L 0.4, A1 0.4, X2D 0.4, X1E 0.4, P1P 0.4, P2S 0.4, H2S 0.4, H2D 0.4PETG

    Not printable on our printers

  • 0.2mm layer, 2 walls, 10% infill, PETG

    ⏱ 20h 24m · 482 g · 1 material(s)

    Prints on: A1 0.4, H2D 0.4, H2C 0.4, A2L 0.4, H2S 0.4, P2S 0.4, H2D Pro 0.4, X2D 0.4PETG

    Not printable on our printers

  • AMS lite Top Mount + Secure Latch Clamp + Scraper Holder

    ⏱ 14h 43m · 548 g · 2 material(s)

    Prints on: A1 0.4, H2C 0.4, H2D Pro 0.4, A2L 0.4, X2D 0.4, P2S 0.4, H2S 0.4, H2D 0.4PLAPLA

    Not printable on our printers

  • Tree Supports: (PETG) 0.2mm layer, 2 walls, 15% infill

    ⏱ 21h 37m · 545 g · 1 material(s)

    Prints on: P1S 0.4, X1 0.4, A2L 0.4, H2D 0.4, H2C 0.4, A1 0.4, H2S 0.4, P1P 0.4, X1E 0.4, P2S 0.4, H2D Pro 0.4, X1 Carbon 0.4, X2D 0.4PETG

    Not printable on our printers

  • Zur Verbesserung der Stabilität und Justierbarkeit

    ⏱ 14h 27m · 571 g · 1 material(s)

    Prints on: A1 0.4, P2S 0.4, H2D Pro 0.4, A2L 0.4, H2S 0.4, H2C 0.4, H2D 0.4, X2D 0.4PLA

    Not printable on our printers

  • 0.25mm layer, 2 walls, 7% infill

    ⏱ 12h 38m · 455 g · 1 material(s)

    Prints on: A1 0.4, A2L 0.4, H2D 0.4, H2C 0.4, H2S 0.4, H2D Pro 0.4, P2S 0.4, X2D 0.4PLA

    Not printable on our printers

  • AMS 0.2mm layer, 2 walls, 15% infill

    ⏱ 7h 7m · 327 g · 2 material(s) · needs AMS

    Prints on: A1 0.4, H2C 0.4, H2D Pro 0.4, P2S 0.4, H2S 0.4, X2D 0.4, H2D 0.4, A2L 0.4PLAPLA

    Not printable on our printers

  • AMS Lite Top Mount For A1

    ⏱ 15h 22m · 575 g · 2 material(s) · needs AMS

    Prints on: A1 0.4, H2S 0.4, P2S 0.4, H2C 0.4, H2D Pro 0.4, H2D 0.4, A2L 0.4, X2D 0.4PLAPLA

    Not printable on our printers

  • AMS Lite Top Mount For A2L

    ⏱ 9h 40m · 249 g · 2 material(s) · needs AMS

    Prints on: A2L 0.4, H2C 0.4, H2D Pro 0.4, H2S 0.4, H2D 0.4PLAPLA

    Not printable on our printers

  • 优化增强版，0.2mm layer, 2 walls, 15% infill

    ⏱ 12h 28m · 530 g · 1 material(s)

    Prints on: P2S 0.4, A1 0.4, H2C 0.4, H2D Pro 0.4, H2D 0.4, H2S 0.4, A2L 0.4, X2D 0.4PLA

    Not printable on our printers

  • All on one plate - H-Series

    ⏱ 14h 56m · 579 g · 1 material(s)

    Prints on: H2C 0.4, H2D Pro 0.4, H2S 0.4, A2L 0.4, H2D 0.4PLA

    Not printable on our printers