Compatible with both - https://makerworld.com/en/models/747428#profileId-680642 https://makerworld.com/en/models/606324#profileId-531273 Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268 Uses 8x2mm magnets, 100 in total. - Be sure to use the magnets in the BOM as they were tested and work properly . P.S - Me and my Family have been super sick this past week and haven't been able to get any work or test printing done. This did fail about half way up the Main. This was due to a clog in the poop shoot that I wasn't home to deal with. Besides that one fail everything printed perfectly, I'm 100% sure if I were home the fail wouldn't of happened at all. So do keep a eye out for Shoot clogs. Enjoy

SpideyPool

by Budwin · original on MakerWorld ↗

♥ 1.0k⬇ 1.5k🖨 140 prints

License: Standard Digital File Licensemarveldeadpoolmanspiderdeadpoolmaskhelmetpropscosplaybudwinwadewilsonpeterparkerspidermanspider-man

Print profiles

SpideyPool-Sliced-100%
⏱ 183h 52m · 2880 g · 3 material(s) · needs AMS
Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLAPLA
Not printable on our printers