🖨️ Print Shop
Flexi Spider (Articulated)

ℹ️Tips for printing: Filament: PLA (only use PLA) Supports: No Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! Info‼️: Do not scale the spider any smaller otherwise the connections will no longer work! Info‼️: If you apply too much force to the legs they may break because the connections are very small! Info‼️: Please be careful when removing the spider from the print bed! ------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (3 Color Version): PLA / Black - for the body and legs PLA / Dark Brown - for the body and legs PLA / Red - for the eyes Or decide for yourself which colors and how many you want to use! ℹ️When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste! Boost Me If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!

Flexi Spider (Articulated)

by 3DPrintyi · original on MakerWorld ↗

♥ 7.7k⬇ 18.4k🖨 11.9k prints

License: Standard Digital File Licensehalloweenspiderarticulatedmulticoloranimalflexi

Print profiles

  • 0.16mm layer, 3 walls, 3 Color Black/white/Red

    ⏱ 6h 20m · 92 g · 3 material(s) · needs AMS

    Prints on: A1 0.4, P1P 0.4, H2D Pro 0.4, P2S 0.4, X1E 0.4, X1 0.4, X2D 0.4, A1 mini 0.4, A2L 0.4, X1 Carbon 0.4, H2C 0.4, H2S 0.4, H2D 0.4, P1S 0.4PLAPLAPLA

    Not in stock

  • Multicolor 3 Color 0.16mm layer, 3 walls, 15% infill

    ⏱ 5h 30m · 71 g · 3 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, P2S 0.4, H2S 0.4, H2D Pro 0.4, A1 mini 0.4, X2D 0.4, A2L 0.4, P1S 0.4, P1P 0.4, H2C 0.4, H2D 0.4, X1E 0.4, A1 0.4, X1 0.4PLAPLAPLA

    Not in stock

  • Keychain Multicolor 3Color 0.16mm layer, 3 walls, 15% infill

    ⏱ 5h 29m · 72 g · 3 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, P1S 0.4, H2D 0.4, X1 0.4, H2C 0.4, A2L 0.4, A1 mini 0.4, A1 0.4, P2S 0.4, P1P 0.4, H2D Pro 0.4, H2S 0.4, X1E 0.4, X2D 0.4PLAPLAPLA

    Not in stock

  • 2 colors variable layer height, 2 walls, 15% infill

    ⏱ 5h 25m · 70 g · 2 material(s) · needs AMS

    Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLA

    Not in stock

  • Car keychain + bag keychain/better

    ⏱ 5h 18m · 65 g · 2 material(s) · needs AMS

    Prints on: A1 mini 0.4, P1S 0.4, X2D 0.4, A2L 0.4, H2S 0.4, X1E 0.4, A1 0.4, H2D Pro 0.4, P2S 0.4, H2C 0.4, X1 0.4, P1P 0.4, H2D 0.4, X1 Carbon 0.4PETGPETG

    Not in stock

  • SINGLE COLOR - OPTIMIZED, 0.2mm layer, 3 walls, 10% infill

    ⏱ 1h 9m · 24 g · 1 material(s)

    Prints on: A1 mini 0.4, H2C 0.4, P1P 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, X1 Carbon 0.4, X1E 0.4, X1 0.4, A1 0.4, P1S 0.4, H2D 0.4, A2L 0.4, X2D 0.4PLA

    Not in stock

  • RESIZED 170%, 0.2mm layer, 3 walls, 10% infill

    ⏱ 2h 20m · 65 g · 1 material(s)

    Prints on: A1 mini 0.4, X1E 0.4, H2S 0.4, X1 0.4, P2S 0.4, X1 Carbon 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, P1P 0.4, P1S 0.4, H2D 0.4, X2D 0.4, A1 0.4PLA

    Not in stock