🖨️ Print Shop
Dummy 13 Spider Man 200%

Dummy 13 Spider Man Edition. 200% Size 0.20mm with 0,4mm Nozzle. No Support or Brim needed Schau dir auch Spider Gwen an. Spider Gwen Dummy 13 - 200% Skalierung – Kostenloses 3D-Druckmodell – MakerWorld

Dummy 13 Spider Man 200%

by Itz · original on MakerWorld ↗

♥ 6.0k⬇ 15.1k🖨 8.0k prints

License: BY-NCspider mandummydummy13

Print profiles

  • 0.2mm layer, 2 walls, 15% infill

    ⏱ 9h 6m · 193 g · 4 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, H2D Pro 0.4, P1P 0.4, P2S 0.4, P1S 0.4, A1 0.4, H2S 0.4, X1E 0.4, H2C 0.4, X1 0.4, H2D 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

    Not printable on our printers

  • faster print with magnetic Hands 8x2

    ⏱ 8h 32m · 183 g · 4 material(s) · needs AMS

    Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLAPLAPLA

    Not printable on our printers

  • 0.16mm layer, 4 walls, 10% infill, 150%

    ⏱ 8h 13m · 89 g · 4 material(s)

    Prints on: A1 0.4, X1E 0.4, P2S 0.4, H2S 0.4, H2C 0.4, X1 Carbon 0.4, A1 mini 0.4, H2D Pro 0.4, H2D 0.4, P1P 0.4, X1 0.4, P1S 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

    Not in stock

  • 6x3 and dual 6x3 magnets

    ⏱ 14h 4m · 271 g · 4 material(s) · needs AMS

    Prints on: A1 0.4PLAPLAPLAPLA

    Not printable on our printers

  • Venom 0.16mm layer, 4 walls, 10% infill

    ⏱ 6h 35m · 88 g · 2 material(s)

    Prints on: P1S 0.4, X1E 0.4, H2C 0.4, X1 0.4, H2D Pro 0.4, H2D 0.4, A1 0.4, P1P 0.4, X1 Carbon 0.4, H2S 0.4, P2S 0.4, X2D 0.4, A2L 0.4PLAPLA

    Not printable on our printers

  • Stronger body, Higher quality head, 2 plates

    ⏱ 12h 60m · 196 g · 4 material(s) · needs AMS

    Prints on: A1 0.4PLAPLAPLAPLA

    Not printable on our printers

  • SpiderGwen 0.2mm layer, 2 walls, 15% infill

    ⏱ 21h 51m · 357 g · 4 material(s) · needs AMS

    Prints on: A1 0.4, H2S 0.4, H2D Pro 0.4, P1P 0.4, H2C 0.4, P1S 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, P2S 0.4, H2D 0.4, X2D 0.4, A2L 0.4PLAPLAPLAPLA

    Not printable on our printers

  • Spiderman Dummy 13 | A1 Mini Compatible | AMS Version

    ⏱ 9h 55m · 185 g · 4 material(s) · needs AMS

    Prints on: A1 mini 0.4, X1 0.4, A1 0.4, H2C 0.4, H2D 0.4, H2S 0.4, X2D 0.4, A2L 0.4, X1E 0.4, X1 Carbon 0.4, P2S 0.4, P1P 0.4, P1S 0.4, H2D Pro 0.4PLAPLAPLAPLA

    Not in stock