Video https://www.instagram.com/p/CyjWU_0LJtO/ Easy to print dual color spider. Works well with PLA. Bend the legs using heat such as a heat gun, solder iron or lighter. A few seconds of heating then bend the legs. Do not overheat How to: drag both multicolor_spider_red.stl and multicolor_spider_black.stl into the slicer and make sure they are combined in the right position. Assign black filament to multicolor_spider_black and red filament to multicolor_spider_red. If you don't have a multicolor printer you can print the multicolor_spider_black.stl and separate_multicolor_spider_red.stl separate and glue the parts together Single color spider that works very well with TPU: https://makerworld.com/en/models/13900#profileId-20541 Subscribe or follow me on Instagram: https://www.instagram.com/agepbiz/ Twitter: https://twitter.com/agepbiz YouTube: https://www.youtube.com/agepbiz

Dual Color Spider

by agepbiz · original on MakerWorld ↗

♥ 729⬇ 3.8k🖨 3.1k prints

Print profiles

• 0.2mm layer, 2 walls, 25% infill

  ⏱ 1h 20m · 21 g · 2 material(s) · needs AMS

  Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not printable on our printers

• separate parts 0.16mm layer, 2 walls, 25% infill

  ⏱ 24m · 4 g · 2 material(s) · needs AMS

  Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not printable on our printers

• 0.16mm layer, 2 walls, 25% infill

  ⏱ 1h 38m · 24 g · 2 material(s) · needs AMS

  Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not printable on our printers

• 0.16mm layer, 2 walls, 25% infill for A1 Mini

  ⏱ 1h 47m · 23 g · 2 material(s) · needs AMS

  Prints on: A1 mini 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4, A1 0.4, H2D 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, H2C 0.4, X2D 0.4, A2L 0.4PLAPLA

  Not in stock