This is my first ever model. the idea is for a board or another existing keyring hanger where you want to replace the pegs with this one. the “knob/peg” has a threaded cap for the hole with the screw so i can be mounted seamlessly. now for the technical and actually usefull part. print time for me was about 28 mins for one and i used Bambu lab A2L layer height 0.12 and high quality. No supports needed. Measurements of the whole thing (with cap on): depth 21.1mm/0.83inch. width 14.85cm/0.58inch. screw hole exit in diameter: 3mm/0.118inch. screw hole entrance: 7.8mm/0.3inch.

Keyring hanger with hidden screw

by Ham Der · original on MakerWorld ↗

♥ 3⬇ 0🖨 0 prints

License: BY-NC-SAkeyringhangerhidden skrew

Print profiles

0.12mm layer, 2 walls, 15% infill
⏱ 28m · 3 g · 1 material(s)
Prints on: A2L 0.4, H2S 0.4, X1E 0.4, X1 0.4, P2S 0.4, P1P 0.4, X2D 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, A1 mini 0.4, P1S 0.4, X1 Carbon 0.4, H2D 0.4PLA
Not in stock