1 inch airgun scope ring for 11mm dovetail rail 1 inch scope rings for 11mm dovetail rail! Hardware: 4x M3x16 6x M3 Hex Nut 2x M3x20 Important! you must slightly heat up the hex nuts with a lighter before you put them in, or they will not go in at all! Tested on the Daisy Powerline 901.

1 inch airgun scope rings for 11mm dovetail rail

by Revolver3D · original on MakerWorld ↗

♥ 9⬇ 12🖨 9 prints

Print profiles

• 11mm dovetail scope rings PETG Basic

  ⏱ 1h 13m · 25 g · 1 material(s)

  Prints on: P1S 0.4, H2D 0.4, A1 mini 0.4, H2C 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, A2L 0.4, X1E 0.4, A1 0.4, X1 Carbon 0.4, P1P 0.4, H2S 0.4, P2S 0.4PETG

  Not in stock