A battered face. Still smiling. This Yuji Itadori HueForge keeps the sketch-like lines, scars, and scarf in a stark monochrome portrait. Three filaments build the shading without losing that drawn-on-paper look. Print setup Size: approximately 127.8 × 200 × 1.68 mm Printer / nozzle: Bambu Lab P1S / 0.4 mm Layers: 0.08 mm; first layer 0.16 mm Strength: 2 walls · 100% infill Supports: off Filaments: 3 colours Open the original 3MF in Bambu Studio and keep the saved colour changes, layer settings, and Z scale intact. The 200 mm side does not fit the A1 mini at this size. Filament lineup PLA filament TD Bambu Lab Basic Black 0.6 Bambu Lab Basic Blue Gray 3 Bambu Lab Basic Jade White 5 TD means transmission distance. These are the values used in the source HueForge project; a different filament can change the shading. Colour changes Start with Black. Height Change to 1.04 mm Blue Gray 1.28 mm Jade White for the rest Share your print If you print this one, post a make. I’d love to see it off your bed.

Yuji — Scarred Smile | Jujutsu Kaisen HueForge

by 3D Prints By Vic · original on MakerWorld ↗

♥ 3⬇ 0🖨 0 prints

License: Standard Digital File Licensehueforgeyujijujutsu kaisenanimewall art

Print profiles

3 colours | 0.08mm layers | 100% infill
⏱ 4h 41m · 47 g · 3 material(s) · needs AMS
Prints on: P1S 0.4, H2S 0.4, X1 0.4, X1E 0.4, P2S 0.4, P1P 0.4, X2D 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, X1 Carbon 0.4, H2D 0.4PLAPLAPLA
Not printable on our printers