Gojo reaches through a swirl of blue energy. Black, blue, turquoise, white, and latte brown bring the hand, expression, and energy effect together in this Jujutsu Kaisen HueForge. Print setup Size: 200 × 200 × 2.48 mm Printer / nozzle: Bambu Lab P1S / 0.4 mm Layers: 0.08 mm; initial layer 0.16 mm Strength: 2 walls · 100% infill Supports: off Filaments: 5 colours Open the supplied 3MF in Bambu Studio. Keep the Z scale, layer settings, and colour changes intact. The project includes thicker base layers, so use the saved colour changes and heights below rather than recalculating slicer layer numbers. Bed size: this 200 × 200 mm print does not fit an A1 mini at full size. Filament lineup PLA filament TD Bambu Lab Basic Black 0.6 Bambu Lab Basic Blue 4 Bambu Lab Basic Jade White 5 Bambu Lab Matte Latte Brown 2 Bambu Lab Basic Turquoise 3.4 TD is transmission distance. These are the values used for this HueForge; substituting filaments can change the finished colours. Colour changes Start with Black. Height Filament 0.64 mm Blue 0.80 mm Jade White 0.96 mm Blue 1.28 mm Black 1.44 mm Latte Brown 1.76 mm Jade White 2.08 mm Turquoise 2.40 mm Blue to finish Share your print If you give this one a go, post a make. I’d love to see what comes off your bed.

Gojo — Blue Energy | Jujutsu Kaisen HueForge

by 3D Prints By Vic · original on MakerWorld ↗

♥ 12⬇ 4🖨 1 prints

Print profiles

• 5 colours | 0.08mm layers | 100% infill

  ⏱ 6h 1m · 63 g · 5 material(s) · needs AMS

  Prints on: P1S 0.4, H2S 0.4, P1P 0.4, P2S 0.4, X1 Carbon 0.4, A1 0.4, X1 0.4, A2L 0.4, X2D 0.4, X1E 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4PLAPLAPLAPLAPLA

  Not printable on our printers