A wink, a staff, and a bold orange backdrop. This One Piece HueForge keeps Nami’s expression front and centre, with four filaments building the detail and colour. Print setup Size: 200 × 200 × 1.92 mm Printer / nozzle: Bambu Lab P1S / 0.4 mm Layers: 0.08 mm; initial layer 0.16 mm Strength: 2 walls · 100% infill Supports: off Filaments: 4 colours Open the supplied 3MF in Bambu Studio. Keep the Z scale, layer settings, and colour changes intact. The project includes thicker base layers, so use the saved colour changes and heights below rather than recalculating slicer layer numbers. Bed size: this 200 × 200 mm print does not fit an A1 mini at full size. Filament lineup PLA filament TD Bambu Lab Basic Black 0.6 Bambu Lab Basic Blue Gray 3 Bambu Lab Basic Jade White 5 Bambu Lab Basic Pumpkin Orange 5.5 TD is transmission distance. These are the values used for this HueForge; substituting filaments can change the finished colours. Colour changes Start with Black. Height Filament 0.80 mm Blue Gray 0.96 mm Jade White 1.52 mm Pumpkin Orange to finish Share your print If you give this one a go, post a make. I’d love to see what comes off your bed.

Nami — Orange Backdrop | One Piece HueForge

by 3D Prints By Vic · original on MakerWorld ↗

♥ 7⬇ 4🖨 3 prints

License: Standard Digital File Licensehueforgeanimenamiwall artone piece

Print profiles

4 colours | 0.08mm layers | 100% infill
⏱ 3h 48m · 63 g · 4 material(s) · needs AMS
Prints on: P1S 0.4, H2D Pro 0.4, A2L 0.4, H2S 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4PLAPLAPLAPLA
Not printable on our printers