Turn a simple hexagonal frame into a unique piece of 3D art! This design is filled with small hexagonal tiles in three different heights: 3 mm, 5 mm and 7 mm . The height differences create a playful 3D effect that changes with the light and viewing angle. Choose your own colors and arrangement to create anything from a calm geometric design to a bold, colourful mosaic. Every finished piece will be completely unique. Included files Hexagonal frame 91 full hexagon tiles 18 matching edge pieces Tiles in three different heights A complete layout containing all 109 pieces Separate files for creating your own colour and height combinations A small fit-test file Assembly Print the frame and tiles in your preferred colours. Arrange the tiles inside the frame before attaching them. You can start in the centre and work towards the edges so that the small amount of clearance is distributed evenly. Or you can start at one of the edges. The tiles can be attached using thin double-sided tape or a small amount of glue. Printing No supports required Print the tiles with the flat side on the build plate PLA works perfectly Print the fit-test before printing the complete set Mix different filament colours for the best effect Create your own pattern, experiment with height and colour, and turn this geometric mosaic into a design that is truly yours!

3D Hexagon Mosaic – Create Your Own Pattern

by Cartoontje · original on MakerWorld ↗

♥ 2⬇ 0🖨 0 prints

Print profiles

• 0.12mm layer, 2 walls, 15% infill

  ⏱ 7h 58m · 136 g · 3 material(s)

  Prints on: A1 0.4, H2C 0.4, H2D 0.4, P1P 0.4, H2D Pro 0.4, X1 Carbon 0.4, P1S 0.4, H2S 0.4, X1 0.4, A2L 0.4, X2D 0.4, X1E 0.4, P2S 0.4PLAPLAPLA

  Not printable on our printers