Parametric OpenSCAD generator for cover plates compatible with the BTicino Matix series, covering Italian 502, 503, 504 and 505 flush-mount boxes. The rear geometry (skirt, snap hooks, ratchet teeth) was measured from a real Matix 503 plate, so the plates click onto original Matix supports (503SA/504SA) the same way the factory plates do. Outer dimensions follow the BTicino catalogue: 84 mm high, 96.2 / 120 / 143.7 mm wide for 2 / 3 / 4 modules (5 modules extrapolated to 167.4 mm). Customizer parameters (only four): moduli — width: 2, 3, 4 or 5 modules raggio_esterno — outer corner radius raggio_finestra — window corner radius tappo — blind plate: no window, no hooks, two countersunk screw holes on the standard box spacing (60 / 83.5 / 108.5 mm) Everything else (front thickness, 45° edge chamfer, rear skirt, release notches, hook position and ratchet teeth) is fixed to the measured values and can be edited in the [Hidden] section of the .scad file. Printing Print face down, no supports. The four snap tabs are 1.3 mm thick and flex between layers — PETG or ASA recommended; with PLA increase gancio_t to 1.8. The 0.3 mm ratchet teeth need a 0.4 nozzle and ≤ 0.15 mm layers to come out clean. Nice with a textured plate or a fuzzy-skin/texture on the front. Notes 502 and 504/505 hook positions are derived from the 503 measurement; verify on your support before printing a batch. Not compatible with MatixGO (different support and plate system). Not affiliated with BTicino/Legrand.

BTicino Matix Cover Plates (502/503/504/505/Blind)

by Rediscov · original on MakerWorld ↗

♥ 1⬇ 1🖨 1 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 42m · 22 g · 1 material(s)

  Prints on: A1 mini 0.4, P1P 0.4, A2L 0.4, X1E 0.4, H2D Pro 0.4, X1 0.4, A1 0.4, P1S 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, H2S 0.4, X2D 0.4PLA

  Not in stock