The All in One Parametric Project Box / Enclosure Case Generator Tired of modeling a new enclosure from scratch for every microcontroller or PCB project? This is a fully parametric enclosure system — no CAD skills needed, just type in numbers and pick from dropdowns. The design comes as 3 files, so you only load the complexity you actually need: 🌟 AiO_Case — Full Combo The complete system: the full case builder (box size, walls, base, lid, closures) combined with the PCB/cutout/ventilation engine. PCB holders, standoffs, and cutouts can go on the lid and base, not just the side walls — if you've got a screen on the lid, I/O ports on the sides, and boards mounted to the base, this is the only file you need. Full control over the outer dimensions, wall-slot depth, and corner rounding/chamfer (handy if you need extra clearance around a screw head, for example). Corner pillars size themselves automatically to fit whatever hardware you pick — switch from an M2 screw to an M6, or from screws to magnets, and the pillar grows or shrinks to match. No manual calculation. Each wall can be fixed (glued), slide-in, or left open entirely — leave a wall out if you'd rather cut it from acrylic or wood yourself. Base and lid close with heat-set inserts (M2 through M6, plus common UNC sizes), magnets, or snap-fit clips — mix and match per side. The base can also be glued shut permanently if you don't plan on reopening it. Up to 6 round/rectangular cutouts, 2 ventilation or speaker grilles and 4 PCBs, on any surface. 🎛️ One_Panel — Panel Maker Skip the case and get a single, precisely engineered mounting plate or front panel — same PCB/cutout/ventilation engine as above, none of the case menus. Up to 6 round/rectangular cutouts, 2 ventilation or speaker grilles and 4 PCBs on one plate. One or two boards center themselves automatically; three or four arrange into a neat quadrant grid — no manual math. Each board can be held with corner posts, edge snap tabs, screw standoffs, or any combination. Standoffs can include pre-modeled pilot holes for self-tapping screws. 🖥️ Also included Live 3D preview with print-plate selection — set your bed size once, and parts auto-arrange across as many plates as needed. Panel dimensions are shown right in the 3D view, so there's no measuring by hand. Cutouts position by center or by offset, wherever you need them. Ventilation/speaker patterns come in stripes, squares, or hexagons, with optional mounting holes for a fan or speaker grille. Heat-set insert sizing covers M2–M6 and several UNC threads, so this isn't limited to metric hardware. Want to see it running before you touch a single parameter? The AiO_DemoCase is a complete example (the full-combo file) with everything already configured — open it and it just works. Looking for something even simpler — a plain case with no PCB mounting at all? A trimmed-down "Easy Version" lives on my original Customizable Case project — same core engine, fewer menus. 👉 https://makerworld.com/de/models/3231461 👈 If this ends up housing your project, I'd genuinely love to see it — post a Make!

V2 Project Box & Enclosure Customizer !New Design!

by Curon · original on MakerWorld ↗

♥ 6⬇ 8🖨 3 prints

Print profiles

• 80 x 80 x 80 Demo Case with some Options

  ⏱ 3h 39m · 91 g · 1 material(s)

  Prints on: P2S 0.4, H2S 0.4, X1 0.4, X1E 0.4, X2D 0.4, P1P 0.4, A1 0.4, H2C 0.4, H2D Pro 0.4, A2L 0.4, P1S 0.4, X1 Carbon 0.4, H2D 0.4PETG

  Not printable on our printers

• 50 x 50 x 40 Quick Demonstration Box

  ⏱ 1h 31m · 33 g · 1 material(s)

  Prints on: P2S 0.4, P1S 0.4, X1 Carbon 0.4, X1 0.4, A2L 0.4, P1P 0.4, H2D Pro 0.4, H2D 0.4, A1 mini 0.4, H2S 0.4, X2D 0.4, X1E 0.4, A1 0.4, H2C 0.4PETG

  Not in stock

• 120 x 80 x 60 Demonstration Box

  ⏱ 3h 11m · 100 g · 1 material(s)

  Prints on: P2S 0.4, A2L 0.4, H2D Pro 0.4, H2D 0.4, H2S 0.4, A1 0.4, H2C 0.4, X2D 0.4PETG

  Not printable on our printers