I used the Opengrid Bare Snap-In blank and designed a socket for a standard pencil to slot in. It works well as a way to organize yarn on the OpenGrid wallplates. I printed it in Bambu PETG Basic, the pencil should slide in with slight resistance. I haven't glued the pencils in place as the fit is tight, but if your tolerances are not tight enough you could add some glue.

OpenGrid PencilPost socket at 15 degrees

by beancam · original on MakerWorld ↗

♥ 0⬇ 1🖨 0 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 33m · 4 g · 1 material(s)

  Prints on: P2S 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, H2C 0.4, P1P 0.4, A1 0.4, A1 mini 0.4, H2S 0.4, P1S 0.4, X1E 0.4, X1 Carbon 0.4PETG

  Not in stock