iPhone Pro Max wall mount with the Apple MagSafe Charger support Originally it was made for the iPhone 13 Pro Max, and tested with the 13 Pro Max, 14 Pro Max, 15 Pro Max. Should fit 16 Pro Max as well (not tested). iPhone cover should support MagSafe. Not every covers can fit. This iPhone wall mount can be mounted with 2 screws, Apple MagSafe Charger can be inserted. Screws are hidden under the cover, you can hide the wire too, you just need a hole, big enough for the Type C connector to go through. Cover can be opened wit the flat scredriver. There are 2 versions of the Apple MagSafe Chargers: an original 15W, and the newer 25w, which is thinner and slightly less in diameter. Choose your version. For a good finish, i'm using a Fuzzy Skin (Contour, Classic, 0.2; 0.1) for the holder itself, and NOT using it for the cover (it will not fit). Supports are enabled (can be seen on photo). Printed and tested only with PETG.

iPhone MagSafe Wireless Charger Wall Mount Holder

by 10001 · original on MakerWorld ↗

♥ 0⬇ 4🖨 4 prints

License: BY-SAiphone magsafe dockiphone magsafe chargeriphone magsafe

Print profiles

PETG, 0.2mm layer, 2 walls, 15% infill
⏱ 4h 51m · 75 g · 4 material(s) · needs AMS
Prints on: A1 mini 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, P2S 0.4, H2C 0.4, P1P 0.4, X1E 0.4, A1 0.4, H2S 0.4, P1S 0.4, X1 Carbon 0.4PETGPETGPETGPETG
Not in stock