Custom Buzzard Folding Stock The Buzzard folding stock is designed for airsoft replicas with a rear Picatinny rail. It locks in place when unfolded, and with a simple press of a button, the stock folds and snaps into place to keep it from flopping around. (Note that it may unsnap if moved too hard, as it’s a simple snap-fit mechanism.) Two hinge versions are included: Standard: For most rear Picatinny rail adapters. XS: A shorter hinge for a more compact setup. Boost Me Like my designs? A Boost is a great way to support me 🙂 Membership Want to sell prints of my models? Join the membership to get a commercial license! ----- Assembly ----- To assemble the folding stock, you'll need: -1 × 7x12mm compression spring (for the button, available on MakerWorld) -1 × M3 × 16mm screw (to hold the button in the stock) -2 × M4 × 30mm screws + nuts (to clamp onto the Picatinny rail) -1 x M5 × 25mm (minimum) screw + nut (to attach the buttstock to the arm) -1 small piece of filament (used as a hinge pin, melted on both ends to hold it in place) Melt both ends of the piece of filament to lock the pin in place: Some light sanding may be needed on supported areas for a clean fit.

Custom Buzzard Airsoft Picatinny Folding Stock

by Julien Hoang · original on MakerWorld ↗

♥ 74⬇ 49🖨 19 prints

Print profiles

• NORMAL CLAMP VERSION

  ⏱ 15h 48m · 138 g · 1 material(s)

  Prints on: A1 0.4, H2S 0.4, P2S 0.4, P1P 0.4, X1E 0.4, X1 0.4, X2D 0.4, P1S 0.4, H2C 0.4, H2D 0.4, A2L 0.4, H2D Pro 0.4, X1 Carbon 0.4PETG

  Not printable on our printers

• CLAMP XS VERSION

  ⏱ 15h 27m · 134 g · 1 material(s)

  Prints on: A1 0.4, H2S 0.4, P1S 0.4, X1 Carbon 0.4, X1E 0.4, H2D 0.4, A2L 0.4, H2D Pro 0.4, X1 0.4, P2S 0.4, X2D 0.4, P1P 0.4, H2C 0.4PETG

  Not printable on our printers