This is a simple keyholder for everyday use, strong and sturdy. You can either buy your own metal binding screw and nuts (M4x12mm, find dimensions underneath) or print your own plastic version (of course less strong). Included in the 3mf file, on the first plate you'll find two versions with different hole sizes, the one marken unprintable is the one used for the plastic plug/retainer. Make sure to print the right one! There is also a spacer on the printbed that you should make 8.4mm - (the thickness of your keys) On the second plate you'll find the plastic plug/retainer along with a wedge meant to be pushed through the clip-part to secure it further. If you have any issues with assembly please let me know! Print and assembly steps: 1. Choose between using a metal binding screw or plastic alternative. 2. Choose keyholder accordingly (You dont have to do anything if you chose the metal binding screw, otherwise make the unprintable version printable, and vice versa). 3. Measure your keys' thickness. Scale the spacer to 8.4mm - (that thickness) 4. Print and then assemble! 5. ONLY FOR PLASTIC PLUG/RETAINER* 5.1 Insert the tubeshape into the holder, slip on the keys and spacer as you do. 5.2 Push the clip through the other side and make sure it clicks in securely on the other side. 5.3 Insert the tiny offcut. 5.4 Insert the wedge as far as it goes. DONE! Hope you enjoy! The dimensions of the binding screw should adhere to these dimensions:

Sturdy Keyholder

by DaveyPrints · original on MakerWorld ↗

♥ 0⬇ 0🖨 0 prints

Print profiles

• 0.12mm layer, 2 walls, 15% infill

  ⏱ 57m · 8 g · 1 material(s)

  Prints on: A1 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, P2S 0.4, H2C 0.4, P1P 0.4, X1E 0.4, A1 mini 0.4, H2S 0.4, P1S 0.4, X1 Carbon 0.4PLA

  Not in stock