DoorDock adds a cup holder and removable snack tray to a compatible vehicle door pocket. Adjustable screw clamps make it easy to adapt to different pocket rims. Includes 7 STL parts, a geometry-only 3MF, STEP and editable Fusion files. Carrier: 220 × 96 × 75 mm. Cup opening: 82 mm. Optional 68 mm can insert. Designed for approximately 5–24 mm pocket rims; measure your vehicle before printing. Hardware: 2 M5 × 40 thumb screws, 2 M5 clamp nuts, and 4 low-head M5 mounting bolts (approximately 20 mm) with nuts and washers. Use flexible TPU for the pads and optional insert. Supports are needed beneath the raised tray platform. Arrange and orient parts in your slicer. Physical print, fit, strength and heat testing are pending. Evaluate while parked and keep clear of airbags, controls and exits. Use wrapped snacks or a suitable food-safe liner. Commercial printing enquiries and more functional designs: https://www.patreon.com/KempDesign Images: AI-generated product renders plus an actual CAD screenshot; these are not photographs of a physical print.

DoorDock | Adjustable Van Cup & Snack Holder

by MatthijsK3 · original on MakerWorld ↗

♥ 2⬇ 6🖨 0 prints

Print profiles

No print profiles available for this model.