I redesigned my Star Wars lamp, so everybody with a A1 Mini (or similar print volume) can print it now. The lampshade and base is printed with Bambu Lab PLA black. The diffuser with Bambu Lab PLA Jade White. The base has a thread and can be unscrewed at any time to access the light source. This allows the lampshade to be glued to the base if you want to. Boost Me If you like my work, I would appreciate your boost very much! 🫶 Print infos, settings and tips: Print the lampshade with the logo top side down - use the Textured PEI plate for a textured top surface, for a smoother finish use the Smooth oder Cold Plate. Remove the diffuser plate from the Bambu Lab Light-Kit-001 for a bit stronger light (you can unscrew the casing). The lampshade is set to 100 mm/s print speed for the outer wall to keep a steady printing speed. If you raise the print speed, the filament will look on some layers matte and on others slightly shiny. If you print the lampshade with the logo in white color, you have to print the “Diffuser for transparent logo” - this diffuser will be printed only with walls without a top or bottom layer (printed in vase mode). If you choose a dark color (black, dark grey, etc.) for the logo, you can print the “Diffuser for opaque logo” - this diffuser will be printed with a top layer for better light reflection (printed in vase mode with top layer on bottom). ATTENTION: If you choose for the lampshade (the Death Star Wallpanel) a lighter color, the light will shine through. For example, Bambu Labs PLA Metal, Silk, Silk + is basically opaque. PLA basic or matte and PETG will let with lighter colors the light through.

Star Wars Death Star Wall Lamp - Smaller Version

by ShelbyCob · original on MakerWorld ↗

♥ 11⬇ 3🖨 3 prints

License: Standard Digital File LicensestarwarsStar Warsstar warsdeath starimperialstarwars accessoriesLamplamplamp 001Lightlightlampsmovielightkitlight kit 001light kitdarth vaderimperiumgalacticimperatorpalpatineA1 A1 MINIA1 A1 MiniA1 A1 mini

Print profiles

Death Star Wall Lampshade and Base
⏱ 5h 57m · 158 g · 2 material(s) · needs AMS
Prints on: A1 mini 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, X1 Carbon 0.4, A1 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLAPLA
Not in stock
Diffuser for transparent logo
⏱ 1h 22m · 24 g · 1 material(s)
Prints on: A1 mini 0.4, X1E 0.4, H2S 0.4, X1 0.4, P2S 0.4, X1 Carbon 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, P1P 0.4, P1S 0.4, H2D 0.4, X2D 0.4, A1 0.4PLA
Not in stock
Diffuser for opaque logo
⏱ 1h 28m · 30 g · 1 material(s)
Prints on: A1 mini 0.4, H2S 0.4, P1P 0.4, P2S 0.4, X1 Carbon 0.4, P1S 0.4, A1 0.4, X1 0.4, A2L 0.4, X2D 0.4, X1E 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4PLA
Not in stock