Hi. A can opener in the form of a keychain. This model is made in 1:1 scale from a 22mm wrench. I made a hole in the model to attach it to keys. I printed the model vertically and that's how it's positioned in the file. Printing vertically doesn't require supports and, in my opinion, prints best. A 5mm brim should be set in the 3mf file, but if for some reason it's not, you need to set it, as the contact surface between the model and the plate is very small. Print speeds should also be adjusted so that nothing detaches during printing. If not, I recommend reducing the speeds to avoid excessive vibrations due to the rapid movement of the print head. My prototype was printed with PETG. I don't know how PLA will perform, but the print isn't particularly exposed to heavy loads, so PLA should also be able to withstand it. I hope you like this project. If so, please like it :) Best regards

Wrench tool, can opener. 1:1 scale keychain

by JarZomB007 · original on MakerWorld ↗

♥ 2⬇ 2🖨 2 prints

Print profiles

• 0.2mm layer, 3 walls, 15% infill

  ⏱ 1h 30m · 10 g · 1 material(s)

  Prints on: A1 0.4, H2S 0.4, X1E 0.4, X1 0.4, P2S 0.4, X2D 0.4, P1P 0.4, H2C 0.4, H2D Pro 0.4, A2L 0.4, A1 mini 0.4, P1S 0.4, X1 Carbon 0.4, H2D 0.4PETG

  Not in stock