Celebrate the unbreakable bond of the Uchiha brothers with this matching 2-piece manga keychain set. Designed as a split-composition relief, each keychain features half of the iconic emotional moment between Sasuke and Itachi, aligning perfectly side-by-side to complete the full panel. Generated with optimized topographic height-mapping via MangaRelief Pro , the line art, shading, and tear details translate cleanly into distinct Z-layers for seamless color changes on any 3D printer. Key Features Matching Duo Design: Two separate keychains with mirrored mounting holes, designed for couples, best friends, or sibling pairs. Integrated Hardware Loop: Built-in corner ring mount sized for standard 25mm key rings and chain links without requiring post-processing or drilling. Support-Free Printing: Engineered to print flat on the bed with 100% support-free geometry. No Waste Block Required: Optimized for simple manual filament swaps at layer height or standard AMS/MMU setups. Recommended Print Settings Nozzle Diameter: 0.20mm strongly recommended for fine facial lines (0.40mm compatible). Layer Height: 0.10mm (First layer: 0.10mm or 0.16mm). Infill: 15% – 20% (Rectilinear or Gyroid). Walls: 2–3 loops. Top/Bottom Pattern: Monotonic or Rectilinear. Supports: Strictly disabled. Filament Swap Guide (Color by Layer) For the classic high-contrast manga look shown in the slicer preview: Base & Face Fill (0.00mm – Base Height): White, Light Gray, or Bone White PLA. Line Art & Border (Detail Height – Top): Deep Matte Black PLA. Tip: A Textured PEI build plate gives the back of the tags a clean, scratch-resistant matte finish.

Naruto - Sasuke e Itachi matching duo keychain

by Lions · original on MakerWorld ↗

♥ 4⬇ 4🖨 2 prints

Print profiles

• 0.2mm layer, 2 walls, 20% infill

  ⏱ 28m · 11 g · 2 material(s) · needs AMS

  Prints on: A1 0.4, H2D Pro 0.4, P1S 0.4, H2S 0.4, H2D 0.4, A1 mini 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A2L 0.4PLAPLA

  Not in stock