✦ Overview A sleek, minimalist desktop phone stand defined by clean Full-R geometry and balanced proportions. It relies purely on gravity and a precision-angled slot— no clamps, no springs, and zero magnets . Simply drop your phone into the slot and let geometry do the rest. Designed to sit effortlessly on any modern desk setup while taking up minimal footprint. ✦ Features Dual Slot Sizes Included (Single .3MF Project) Minimalist Sleek Aesthetic: Symmetrical Full-R ends creating a smooth, pill-shaped profile with chamfered edges. Gravity Balance: Angle and slot depth calibrated for stable hands-free viewing and typing stability. 100% Support-Free: Print-in-place design with zero support material required. ✦ Recommended Print Settings File Format: Single .3MF project containing both plates. Layer Height: 0.16 mm (recommended for fine slope transitions) or 0.20 mm (standard). Wall Loops: 3 Top Surface Pattern: Monotonic Line (set Top Surface Speed to 40 mm/s for a clean, brushed-metal look). Infill: 15% - 20% (Gyroid or Grid). Supports: None required (lay flat on build plate). Filament: Silver Silk PLA, Matte PLA, or PETG.

Minimalist iPhone/Android mobile Stand

by Design Reboot 3D · original on MakerWorld ↗

♥ 2⬇ 1🖨 0 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 57m · 28 g · 1 material(s)

  Prints on: A1 mini 0.4, X1 Carbon 0.4, X1E 0.4, H2D Pro 0.4, H2S 0.4, H2D 0.4, P2S 0.4, H2C 0.4, A2L 0.4, P1S 0.4, A1 0.4, X1 0.4, X2D 0.4, P1P 0.4PLA

  Not in stock