I created this model for my rodents. It has two assembly options: single-story and double-story. I used a small amount of superglue at the attachment points to ensure strength.

Rodent house

by 112wolf211 · original on MakerWorld ↗

♥ 0⬇ 1🖨 0 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 10h 2m · 452 g · 1 material(s)

  Prints on: A1 0.4, H2S 0.4, X1E 0.4, X1 0.4, P2S 0.4, X2D 0.4, P1P 0.4, H2C 0.4, H2D Pro 0.4, A2L 0.4, P1S 0.4, X1 Carbon 0.4, H2D 0.4PLA

  Not printable on our printers

• 1st floor 0.2mm layer, 2 walls, 15% infill

  ⏱ 6h 14m · 296 g · 1 material(s)

  Prints on: A1 0.4, H2S 0.4, P1P 0.4, P2S 0.4, X1 Carbon 0.4, P1S 0.4, X1 0.4, A2L 0.4, X2D 0.4, H2D Pro 0.4, H2D 0.4, X1E 0.4, H2C 0.4PLA

  Not printable on our printers