Citadel Paint pot holder with 3 positions for paint pots and 2 cut outs for brush rests. this design was made using Fusion 360, it prevents accidental pot spills and holds the lid in an open position. The rim around the base also prevents drips from the brush running onto the table.

Citadel Paint pot Holder

by Dan_Connell_Designs · original on MakerWorld ↗

♥ 16⬇ 13🖨 29 prints

Print profiles

• 0.28mm layer, 3 walls, 8% infill

  ⏱ 46m · 30 g · 1 material(s)

  Prints on: X1 Carbon 0.4, H2S 0.4, P1P 0.4, P2S 0.4, P1S 0.4, A1 0.4, X1 0.4, A2L 0.4, X2D 0.4, X1E 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4, A1 mini 0.4PLA

  Not in stock