Need some extra intake airflow on your Fractal North? Well, it turns out there's a perfect amount of room to slot in a Noctua NF-A8 (or other 80mm fan) to fill that dead space and improve your cooling. An NF-A8 adds roughly 24% more front intake CFM on top of the stock 2 x 140mm fan setup. The plate screws into the case using the 140mm fan slot positions, and the holes work with standard case fan screws like the ones included with the NF-A8. Optionally, you can use rubber fan rivets in place of screws like I did to attach the fan to the plate ( Link to fan rivets used ). I also use a Front Airflow Duct (not my design) to direct the bottom fan toward the gpu. Printed in PETG, but since this shouldn't see much heat on the intake side I think PLA would work as well (though I have not tested)

Fractal North - 80mm Fan Adapter - Noctua NF-A8

by sleonhard · original on MakerWorld ↗

♥ 0⬇ 3🖨 0 prints

License: MakerWorld Exclusive Licensefractal design northfractal northfractal designnorth case80mm fan mountfan adapterfan bracketfront intakecase fan modpc airflownoctuanoctua nf-a8noctua fan mount80mm pwm fanpc coolingcase fan adapterairflow upgrade

Print profiles

0.2mm layer, 3 walls, 25% infill
⏱ 57m · 26 g · 1 material(s)
Prints on: X2D 0.4, X1 0.4, P1P 0.4, H2D Pro 0.4, H2S 0.4, A1 mini 0.4, P2S 0.4, X1 Carbon 0.4, X1E 0.4, H2C 0.4, A1 0.4, P1S 0.4, H2D 0.4, A2L 0.4PETG
Not in stock