A chunky construction truck for small hands. Big tyres, a cab with black windows, an exhaust stack, and a loader bucket on the front that moves into three positions. Both axles have some suspension: press down on the truck and it dips and comes back up. No screws, no magnets, no bearings. Every joint is printed. Two parts get a dab of super glue (the side skirts), everything else pushes together. Putting it together The assembly guide is in the file section: three pages, one picture per step. Short version: tyres onto rims, hubs onto rims, springs into the chassis from the top, then the axles, then the wheels click on. Bucket and arms onto the front lugs. Bumpers, skirts (glue), windows and lights into the body, then the body onto the chassis and the two pins push up from underneath. Stack and light bar last. Everything is a tight fit on purpose so it stays together in play. If your thumb isn't enough, push with the end of a pliers handle. Don't drill or cut anything to make it easier. If a wheel doesn't spin freely it has been pushed on too far, or it is missing its hub. If a spring pops out it wasn't pushed down until it clicked. Boost Me 🚀 Enjoyed this model? A Boost is completely free and helps me keep creating and sharing more designs. Thank you for your support!

Bull Dozer- Monster Truck With Working Bucket

by Jabz94 · original on MakerWorld ↗

♥ 4⬇ 3🖨 2 prints

Print profiles

• 0.2mm layer, 3 walls, 15% infill

  ⏱ 18h 26m · 555 g · 4 material(s)

  Prints on: A1 mini 0.4, H2S 0.4, X1 0.4, X1E 0.4, P2S 0.4, P1P 0.4, X2D 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, P1S 0.4, X1 Carbon 0.4, H2D 0.4PLAPLAPLAPLA

  Not in stock