Custom Tire Valve Stem Cap - Wobbly Figure (Miner) Give your wheels a little extra personality with this custom 3D-printable tire valve stem cap! This design features a wobbly life inspred figure with a Mining hat and is designed to replace a standard valve stem cap on cars, trucks, trailers, motorcycles, and other compatible vehicles. Design Details Design: Miner Figure Type: Tire Valve Stem Cap Recommended Material: [PETG / ASA / ABS / etc.] Recommended Layer Height: 0.20mm Supports: Yes Print Orientation: As it Sits Approximate Print Time: 15min per cap Quantity: [1 / Set of 4] Fitment: Designed around a standard automotive tire valve stem Printer Used: Bambu Labs A1 Filament Used: PLA Printing Notes For the best results, I recommend printing this model using PLA+ with approximately 15-20% infill . If the model contains small details, using a lower layer height can help preserve the finer features. Outdoor Use: If you're actually installing these on a vehicle, I recommend using a material with good heat and UV resistance, such as ASA or PETG , rather than standard PLA. Fitment This model was designed to fit a standard automotive Schrader-style valve stem . Because printers, materials, shrinkage, and valve stems can vary slightly, you may need to make a small scale or tolerance adjustment for the best fit. Always test the fit before driving with the cap installed. Have an Idea? Send Me a Request! I make custom tire valve stem cap designs and I'm always looking for new ideas! Have something you'd like turned into a valve stem cap? Leave a comment below! Ideas can include: Animals Characters Vehicles Symbols Funny designs Themed designs Personalized concepts Other unique ideas I will do my best to accommodate to all requests that I receive and upload them here to my Makerworld for Free download Like the Design? If you enjoy the model, please consider liking the file and giving it a Boost on MakerWorld . Likes, downloads, ratings, photos of your prints, and Boosts help support my work and allow me to keep creating new custom designs. If you print one, I'd also love to see your finished result! Thank You! Thank you for visiting my MakerWorld page and downloading my 3D file! I appreciate everyone who takes the time to check out my designs, print them, leave feedback, and support my work. If you enjoyed this model, please leave a Like and consider giving the design a Boost. It helps more than you might think and supports the creation of more custom valve stem caps and other 3D-printable designs. Thanks for downloading, and happy printing!

Wobbly Figure with Light Helmet

by Grunts3dFantasyPrints · original on MakerWorld ↗

♥ 2⬇ 2🖨 4 prints

Print profiles

• 0.2mm layer, 2 walls, 30% infill

  ⏱ 31m · 4 g · 1 material(s)

  Prints on: A1 0.4, X1E 0.4, P2S 0.4, H2C 0.4, H2D 0.4, A2L 0.4, X1 Carbon 0.4, A1 mini 0.4, X2D 0.4, H2D Pro 0.4, P1P 0.4, H2S 0.4, X1 0.4, P1S 0.4PLA

  Not in stock