Decorative 3D-printable vase featuring a curved urn-style silhouette, an open diamond lattice body, and a flared neck with accent detailing. Its geometric cutout pattern gives the vase a light, sculptural look while still creating a clean focal piece for a desk, shelf, entry table, or display cabinet. This model includes four ready-to-print profiles: Boost Me Free Boost to support my Work Profile Height Color setup AMS needed Single Color 140 mm One filament No Two Color 140 mm Main color with contrasting neck and base accents Yes Single Color 170 mm One filament No Two Color 170 mm Main color with contrasting neck and base accents Yes The two-color profiles are set up for Bambu Lab AMS printing, allowing the lattice body and accent sections to print in contrasting colors without assembly. The single-color profiles are an easy option for any compatible FDM printer. Printing notes The model is intended as decorative home décor . Use the single-color profiles for a simple, low-waste print. Use the AMS two-color profiles for the full accent-vase appearance. PLA, PLA Silk, matte PLA, or PETG can all produce different looks. Lighter-colored filaments make the lattice pattern stand out, while darker accent colors create strong contrast at the neck and base. No assembly is required for the included profiles. This model is not guaranteed watertight; use a liner, glass insert, or artificial flowers if you plan to display stems or water. Suggested print settings The included profiles are optimized for the listed sizes, but you can also experiment with: Layer height: 0.20 mm for a balanced finish and print time. Walls: 2–3 walls for a more substantial decorative piece. Infill: Low infill is generally sufficient because of the open lattice design. Supports: Not required for the included orientation. Bed adhesion: Use a clean build plate and the profile’s default brim/skirt setting if included. Color ideas Red body + black accents White body + black accents Black body + gold or bronze accents Matte olive body + tan accents Silk blue body + silver accents Marble PLA body + matte black accents If you print one, a rating, photo, or Boost is appreciated. Enjoy the build!

Diamond Lattice Accent Vase

by Timbopolous · original on MakerWorld ↗

♥ 1⬇ 6🖨 5 prints

Print profiles

• Single Color 140 mm

  ⏱ 4h 21m · 97 g · 1 material(s)

  Prints on: H2C 0.4, P1S 0.4, X1 0.4, X1 Carbon 0.4, H2D Pro 0.4, X2D 0.4, H2D 0.4, P2S 0.4, A1 mini 0.4, X1E 0.4, A2L 0.4, A1 0.4, H2S 0.4, P1P 0.4PLA

  Not in stock

• SINGLE COLOR 170 MM

  ⏱ 6h 5m · 148 g · 1 material(s)

  Prints on: H2C 0.4, P1S 0.4, X1 0.4, X1 Carbon 0.4, H2D Pro 0.4, X2D 0.4, H2D 0.4, P2S 0.4, A1 mini 0.4, X1E 0.4, A2L 0.4, A1 0.4, H2S 0.4, P1P 0.4PLA

  Not in stock

• 2 COLOR AMS 140MM

  ⏱ 5h 11m · 118 g · 2 material(s) · needs AMS

  Prints on: H2C 0.4, A2L 0.4, X1E 0.4, X2D 0.4, P1P 0.4, P2S 0.4, A1 0.4, X1 0.4, H2S 0.4, H2D Pro 0.4, P1S 0.4, X1 Carbon 0.4, A1 mini 0.4, H2D 0.4PLAPLA

  Not in stock

• 2 COLOR AMS 170MM

  ⏱ 10h 20m · 190 g · 2 material(s) · needs AMS

  Prints on: H2C 0.4, H2D Pro 0.4, A2L 0.4, P1S 0.4, H2S 0.4, H2D 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4PLAPLA

  Not printable on our printers