Boost Me If you enjoy the model, I'd greatly appreciate it if you could take a moment to like, follow, or share. Your support helps me keep creating awesome designs for you. Thank you so much! Got too many filament spools and nowhere to put them? These wall-mounted shelf brackets turn any standard curtain rod into a sturdy, good-looking spool rack, as many shelves as you need, right on your wall. Print 2 brackets, add a curtain rod, done. The rod snaps into the bracket with a click (more than a semicircle grip) and stays in place with a little screw. Fix the brackets to the wall or to a wooden panel with standard screws. Available in 3 sizes: Ø16 / Ø20 / Ø28 mm to fit the most common curtain rod diameters. Need a different size? Just ask! The honeycomb inserts are printed separately and press-fit into place, so no AMS is required. Please , note that if tolerances are slightly off depending on your printer and settings, a drop of super glue does the job . Each print plate includes one bracket and all its colored inserts, optimized for both AMS (multi-object mode) and single-color printing. Note: the two solid hexagon slots are designed as expansion points for a tool holder system currently in development → stay tuned and follow the profile! 🔧 No supports required - print profile included - 2 prints per shelf.

Filament spool wall shelf - Curtain rod brackets

by Orange Hawk · original on MakerWorld ↗

♥ 577⬇ 195🖨 123 prints

License: MakerWorld Exclusive Licensefilament storagespool holderwall shelffilament rackspool rackworkshop storagewall mountcurtain rodhoneycombHoneycomb Storage Wallhoneycomb accessoriesmodularno supportseasy print3d printer storage

Print profiles

D28 | PLA - X1C | 0.16mm layer, 3 walls, 15% infill
⏱ 3h 11m · 94 g · 2 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLA
Not printable on our printers
0.16mm layer, 3 walls, 15% infill
⏱ 8h 6m · 168 g · 2 material(s) · needs AMS
Prints on: P2S 0.4, A2L 0.4, H2D 0.4, X1 0.4, X1 Carbon 0.4, X2D 0.4, H2D Pro 0.4, P1S 0.4, X1E 0.4, A1 0.4, P1P 0.4, H2S 0.4, H2C 0.4PLAPLA
Not printable on our printers
Ohne Inlays - kein AMS - 0.16mm layer, 3 walls, 15% infill
⏱ 6h 31m · 162 g · 1 material(s)
Prints on: P2S 0.4, A2L 0.4, H2D Pro 0.4, P1S 0.4, X1E 0.4, X1 Carbon 0.4, X2D 0.4, P1P 0.4, X1 0.4, H2C 0.4, H2D 0.4, A1 0.4, H2S 0.4PLA
Not printable on our printers
D16 | PLA - X1C | 0.16mm layer, 3 walls, 15% infill
⏱ 3h 11m · 95 g · 2 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLA
Not printable on our printers
D20 | PLA - X1C | 0.16mm layer, 3 walls, 15% infill
⏱ 3h 11m · 95 g · 2 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLA
Not printable on our printers
D32 | PLA - X1C | 0.16mm layer, 3 walls, 15% infill
⏱ 3h 9m · 93 g · 2 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLA
Not printable on our printers
D7/8in | PLA - X1C | 0.16mm layer, 3 walls, 15% infill
⏱ 3h 11m · 94 g · 2 material(s) · needs AMS
Prints on: X1 Carbon 0.4, P1S 0.4, P1P 0.4, X1 0.4, X1E 0.4PLAPLA
Not printable on our printers