This model has been modified from the original wall-mount design posted here to be mounted onto a Skadis board. Modifications replaced wall mounting with secure T-clip Skadis mounts this ensures a secure hold onto the skadis board and prevents any lifting of the holder when removing the tool T-clips on the build plate are for the white painted Skadis; you may have to slightly scale on x/y-axis to achieve a snug fit on other types back is thickened to recess the T-clips to ensure a flush fit of router plane in holder removed the blade and fence hangers I prefer to keep the sharp blades stored in a drawer and don't use the fence system often enough to warrant taking up space on the board Two Print Options I have provided two ways of printing the model; you only need to print one plate Flat Print with Assembly prints faster and with less filament simply superglue the pieces together after printing Upright ( I personally have not printed this version ) pre-assembled in slicer and prints as one piece the large sweeping curves would reduce print quality, but with adaptive layer height and/or some supports it might turn out alright with variable layer heights, it will take longer to print with the walls oriented this way, it uses about 20% more filament let us know how it turns out if you choose to print this version! :)

Skadis Holder for Veritas Router Plane

by Mikey · original on MakerWorld ↗

♥ 0⬇ 0🖨 0 prints

Print profiles

• 0.2mm layer, 3 walls, 15% infill

  ⏱ 4h 49m · 144 g · 1 material(s)

  Prints on: A1 0.4, P1P 0.4, A2L 0.4, X1E 0.4, H2D Pro 0.4, X1 0.4, A1 mini 0.4, H2D 0.4, P1S 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, H2S 0.4, X2D 0.4PLA

  Not in stock