The Shell Fan Vase features five flowing diagonal folds combined with a controlled asymmetric sweep. Its surface takes inspiration from natural shell patterns while maintaining a clean contemporary shape. The folds develop gradually through the height and contain no fragile or unsupported elements. A stable base, reinforced opening and continuous walls allow the vase to print upright without supports. Model dimensions: • 82.9 × 82 × 150 mm • 2.4 mm designed wall thickness • 2.8 mm designed bottom thickness Recommended print settings: • Material: PLA • Nozzle: 0.4 mm • Layer height: 0.20 mm • Wall loops: 3 • Infill: 15% gyroid • Supports: Off • Brim: 5 mm auto brim • Orientation: Upright • Print mode: Standard mode — do not enable Spiral Vase mode The download includes a watertight STL and a prepared Bambu Studio 3MF profile for the Bambu Lab A1. This model is intended primarily as a decorative vase. FDM prints are not guaranteed to be watertight; use dried or artificial flowers, or seal the finished print before adding water.

Shell Fan Vase – Easy FDM Print

by pRXPAINT · original on MakerWorld ↗

♥ 0⬇ 1🖨 0 prints

License: Standard Digital File Licenseeasy printfdmdecorationhome decorvaseflower vase

Print profiles

0.2mm layer, 3 walls, 15% infill
⏱ 2h 49m · 97 g · 1 material(s)
Prints on: A1 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, X2D 0.4, X1 0.4, P2S 0.4, H2C 0.4, P1P 0.4, X1E 0.4, A1 mini 0.4, H2S 0.4, P1S 0.4, X1 Carbon 0.4PLA
Not in stock