I wanted a simple box to collect the purge waste from my H2C, but the solutions I found were either too complex or required too much material and printing time. So, I designed this simple, custom-sized purge box to fit perfectly in the approximately 15 cm (6 in) gap between my printer and the wall . This solution has worked really well for me, and I believe it should be compatible with all H2 Series printers. It measures 20 × 14 × 5.3 cm (W × D × H) and has enough capacity to hold a large amount of purge waste before needing to be emptied. I printed mine in ABS, but virtually any material should work for this purpose, including PLA.

Simple Poop Box / Waste Bin for H2 Series Printers

by Bruno Lucca · original on MakerWorld ↗

♥ 0⬇ 3🖨 0 prints

Print profiles

• 0.2mm layer, 3 walls, 15% infill

  ⏱ 2h 48m · 122 g · 1 material(s)

  Prints on: H2C 0.4, P1S 0.4, X2D 0.4, H2D 0.4, H2S 0.4, P1P 0.4, X1 0.4, A2L 0.4, X1E 0.4, A1 0.4, X1 Carbon 0.4, H2D Pro 0.4, P2S 0.4ABS

  Not printable on our printers