AS BIG AS IT GETS FOR THE BAMBU P2S! This lampshade is designed for table and floor lamps that use a top-mounted spider fitter . The shade has a center mounting ring at the top that sits over the lamp’s threaded post, and the lamp’s top finial/screw cap tightens down over it to hold the shade in place . This is the common style used on lamps with a harp or similar upper support where the lampshade is secured from the very top, rather than attaching directly around the bulb socket. Approximate finished size: Diameter: 240 mm Height: 245 mm Large cylindrical/drum-style shape Designed to fit comfortably on a Bambu Lab P2S-size printer Mounting style: Top-mounted spider fitter Center washer/ring at the top of the shade Fits over a threaded lamp post Secured with the lamp’s existing finial/top screw Center opening approximately 11.8 mm Designed around a lamp with approximately a 5.86 mm threaded post The shade uses radial support arms from the outer shade to the center mounting ring, similar to a traditional metal spider-frame lampshade. It is intended primarily for LED bulbs , such as Philips Hue bulbs. PETG is recommended over PLA because of its better heat resistance and durability. Before printing, users should measure their own lamp’s threaded post and finial system, since lamp hardware sizes can vary. The center mounting hole can be resized in CAD if necessary.

240mm Drum LED Lampshade with Top Spider Fitter

by ggnofear · original on MakerWorld ↗

♥ 0⬇ 0🖨 1 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 14h 43m · 277 g · 1 material(s)

  Prints on: P2S 0.4, A2L 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4, A1 0.4, H2S 0.4, X2D 0.4PETG

  Not printable on our printers