A replacement/upgrade filter holder for the BoomRoom Fresh Air Exchange system. Designed to securely hold filter pads while providing a large open grille for unrestricted airflow. The BoomRoom fresh-air-exchange system needed a better way to securely hold filter material in place. I designed this adapter with an integrated honeycomb grille to support the filter while still allowing plenty of airflow through the FAE system. It also makes removing and replacing the filter pad easier. Important Fit Note: Please measure your FAE opening before printing. This model is designed specifically around a 3 13/16-inch circular connection . I cut the provided filter pads into four 4in pads. Because the part may be exposed to elevated humidity, PETG would be my preferred material for long-term use.

North Spore BoomRoom FAE Filter Pad Holder

by DRKJedi71 · original on MakerWorld ↗

♥ 2⬇ 0🖨 0 prints

License: Standard Digital File Licenseboomroomnorth sporemushroom growingmushroom grow tentmartha tentmycologyfresh air exchangefaefae fanfilter holderair filterair filter adaptergrow tent

Print profiles

0.2mm layer, 2 walls, 15% infill
⏱ 6h 20m · 141 g · 2 material(s) · needs AMS
Prints on: H2D 0.4, H2S 0.4, X1E 0.4, X1 0.4, P2S 0.4, P1P 0.4, X2D 0.4, A1 0.4, H2D Pro 0.4, H2C 0.4, A2L 0.4, P1S 0.4, X1 Carbon 0.4PLAPETG
Not printable on our printers