ASUS ROG ALLY Z1 DOCK AND UNDER DESK HOLDER (3in1) Inside file there are different variations you can print: You can just print dock or dock with shelf or dock with shelf under desk holder or dock with under desk holder. DOCK: Print next plates: Asus Rog Ally Dock, Asus Rog Ally Cover, Asus Rog Ally Fan Spacers, Asus Rog Ally Shelf (OPTIONAL), and Asus Rog Ally Shelf Clip (OPTIONAL). For dock you need: 4 fans 70x70x14 mm (I re-use them from my old laptop fan cooler, together with electronics). You can use also USB fans) 1 Ivanky 6in1 hub SSD Hard drive reader (dim.: 126x80x14 mm) - OPTIONAL if you will print also the shelf Insert Fan Spacers and Fans as it shows picture down below: After insert Ivanky 6in1 hub: and put cover on top of dock (if you want you can glue dock and cover): Put SSD Hard drive reader inside shelf and connect fans. Use clips to attached shelf to dock. UNDER DESK HOLDER: If you like clean desk and dock at the same time you can print also Asus Rog Ally Under Desk holder. (Disclamer: Logo on picture is not my design, I printed from Maker World and glued to the holder).

ASUS ROG ALLY Z1 DOCK / IVANKY / UNDER DESK MOUNT

by J/E · original on MakerWorld ↗

♥ 2⬇ 0🖨 0 prints

License: Standard Digital File Licenseasus rog ally standasus rog allyasus rog ally under deskasusunder deskdock3in1ivankyreuse

Print profiles

0.2mm layer, 2 walls, 15% infill
⏱ 17h 5m · 422 g · 4 material(s) · needs AMS
Prints on: A1 0.4, P1S 0.4, X1 0.4, H2D Pro 0.4, X2D 0.4, P2S 0.4, H2D 0.4, X1E 0.4, H2C 0.4, A2L 0.4, X1 Carbon 0.4, H2S 0.4, P1P 0.4PLAPLAPLAPLA
Not printable on our printers