Project: Ashley https://www.deviantart.com/thekobs/art/BAD-Ashley-1338811814 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 190.5x190.5mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ae835b PLA BambuLab Matte Caramel Transmission Distance: 1.5 #9d432c PLA BambuLab Basic Brown Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 8 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Blue At layer #10 (0.88mm) swap to Blue At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Caramel At layer #18 (1.52mm) swap to Brown At layer #19 (1.6mm) swap to Caramel At layer #20 (1.68mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.

Ashley Williams

by RepRac11B · original on MakerWorld ↗

♥ 2⬇ 2🖨 0 prints

License: BY-NC-SAmass effectHUEFORGENSFW

Print profiles

0.08mm layer, 2 walls, 15% infill
⏱ 3h 15m · 48 g · 7 material(s) · needs AMS
Prints on: P1S 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, A1 0.4, X1 Carbon 0.4, H2D 0.4, H2C 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLAPLAPLAPLAPLAPLAPLA
Not printable on our printers