Created a fan shroud for Nvidia CMP 170HX cards sice there is no shroud for two cards that sit tight together in a normal ATX chassis. My cards have a gap of around 1,5mm between them but the model have a 1,2mm wall for some clearance. You will need to create/have some kind of support for the fans since all chassis are different. The shroud tunnel is about 13,5cm long, and the fan plate is about 24,5cm tall, the total width is about 17cm. I have a Corsair Obsidian Series 750D case and a server grade motherboard. Need to be printed with supports, I have used PLA so far and it seems to be working fine since the fans cooldown the PLA.

Dual Nvidia CMP 170HX fan shroud dual 120mm fans

by GSXswe · original on MakerWorld ↗

♥ 2⬇ 5🖨 3 prints

License: BY-NC-SAnvidiacmp170hx

Print profiles

0.2mm layer, 2 walls, 15% infill
⏱ 10h 53m · 231 g · 1 material(s)
Prints on: P2S 0.4, H2S 0.4, A1 0.4, A2L 0.4, H2D Pro 0.4, H2D 0.4, H2C 0.4, X2D 0.4PLA
Not printable on our printers