Simple Chair #4 - Vertical Bars The continuation of the Simple Chairs is here! We got a classic as 4th entry, that works well with articulated leg figurines, as a house decoration or a modelhouse addition! The previous Simple Chairs used to have “Horrible horrible supports” . But this time i've gone ahead and separated the legs from the seat, so they now connect with plugs. Hence supports are a thing of the past and the print-time has now been drastically reduced! The best and easiest way to assemble the chair is: Take the seat off the bed plate, but leave the legs. Drop a single drop of superglue in each plug hole. Then put the seat on the legs while they're still on the plate. Wait a minute aaand voila! Easy assemble. It scales fairly well, and if you do decide to print the model as one part, just make sure to give the supports a bit of space between the legs. Be sure to check out the previous pack! Simple Chair Pack #1 Modelled in Fusion. Printed in BambuLab PLA Matte ‘Charcoal Black’ on Bambu H2D Check out my other creations: https://makerworld.com/en/@LateAwake

Simple Chair #4 - Vertical Bars

by LateAwake · original on MakerWorld ↗

♥ 14⬇ 1🖨 0 prints

License: MakerWorld Exclusive Licensechairsimplesimple chairstoolseatsimple 3ddecorsmall chairminiature chairmini chairdollhousedollhouse accesorymini furnitureminiature furniturefurnituredining chairtiny chairtiny furnituredollhouse decordollhouse chairdoll chairarticulated legsflexi legsHome Decorhome decorminimalistminimalist chairlatelateawakelate awakeH2D 3D打印机h2dnosupportnosupportsno supportsno supportEasy

Print profiles

Simple Chair #4 - Vertical Bars 80mm - 13.2g - 47min
⏱ 47m · 14 g · 1 material(s)
Prints on: H2D 0.4, X1E 0.4, X1 0.4, H2D Pro 0.4, P2S 0.4, P1P 0.4, X1 Carbon 0.4, A1 0.4, H2C 0.4, P1S 0.4, A1 mini 0.4, X2D 0.4, A2L 0.4, H2S 0.4PLA
Not in stock