🖨️ Print Shop
Cat Food Organizer – Wet Food Pouch Dispenser

🐱 CAT FOOD ORGANIZER — WET FOOD POUCH DISPENSER A practical and cute organizer for storing and dispensing wet cat food pouches. Load the pouches from the top, put on the removable lid, and take them out one by one through the front dispensing opening. ✨ FEATURES • Holds approximately 15–17 wet food pouches • Convenient top-loading design • Easy front dispensing • Completely removable lid • No screws or additional hardware required • Compact and space-saving design • Cute minimalist cat design 🔝 REMOVABLE LID The lid consists of two printed parts: the main lid and an additional inner base. Print both parts separately and glue the inner base to the main lid. Once assembled, they form one solid and rigid removable lid that securely fits onto the organizer. The lid can be easily removed whenever you need to refill the organizer. 📦 HOW IT WORKS 1. Remove the lid. 2. Load wet food pouches from the top. 3. Put the assembled lid back onto the organizer. 4. Take the pouches out one by one through the front dispensing opening. 🦶 ANTI-SLIP FEET The bottom of the organizer has 4 dedicated mounting points for anti-slip pads. Recommended pad size: 2 × 10 mm The pads help keep the organizer stable and prevent it from sliding on smooth surfaces. 📐 DIMENSIONS 184 × 106 × 200 mm 🖨️ PRINTING The model is designed for easy 3D printing. • Layer height: 0.20 mm • Wall loops: 2 • Infill: 15% • Supports: Not required • Recommended material: PLA • No additional hardware required 🔧 ASSEMBLY The model consists of 3 printed parts: • Organizer body • Main lid • Inner lid base Glue the inner lid base to the main lid after printing. Install four 2 × 10 mm anti-slip pads into the mounting points on the bottom of the organizer. Boost Me ❤️ SUPPORT & COMMERCIAL LICENSE Enjoying this model? ☕ Want to support my work? https://boosty.to/3dmomo 🛠️ Want to sell physical prints of my models? Commercial License is available on my Boosty. Thank you for supporting my 3D designs! 🐱🖨️

Cat Food Organizer – Wet Food Pouch Dispenser

by 3D MoMo · original on MakerWorld ↗

♥ 18⬇ 14🖨 10 prints

License: BY-NC-NDcat foodcat food organizerPETcatsorganizerdispenserfood dispenserpouch

Print profiles

  • 0.20mm PLA/PETG | 2 walls | 15% infill | No supports

    ⏱ 9h 54m · 423 g · 1 material(s)

    Prints on: A1 0.4, P1S 0.4, H2C 0.4, P1P 0.4, X1 Carbon 0.4, H2D Pro 0.4, H2S 0.4, P2S 0.4, A2L 0.4, X1E 0.4, H2D 0.4, X1 0.4, X2D 0.4PLA

    Not printable on our printers