磁铁自行购买10mm*1.5mm的圆形铷磁铁，很便宜，几块钱几十个 安装时可以用钳子压进去，因为我为了让磁铁安装的更紧，误差做的不大，但是取决于你的材料质量和型号可能存在一定偏差；如果打印出来孔偏大可以用胶水固定下，如果偏小可以先用打火机把磁铁稍微加热然后安装上去(这种效果最好) 根据自己需要可以自由组合螺丝盒大小尺寸，数量，收纳比较灵活 主要给临时家电，电器维修时保存螺丝比较好，根据螺丝位置，尺寸自己组合螺丝盒的位置和数量 Magnet Sourcing: You'll need to purchase 10mm x 1.5mm round neodymium magnets separately. They are very affordable, usually costing just a few bucks for dozens. Installation Tips: You can press the magnets in using pliers. I designed the holes with minimal tolerance for a snug fit, but slight deviations may occur depending on your printer and filament. If the holes are too big, you can secure them with glue. If they are too small, briefly heat the magnet with a lighter before pressing it in—this method yields the best results. Customizable Design: You can freely combine modules to adjust the size and number of compartments based on your specific needs, making storage highly flexible. Best Use Case: This organizer is perfect for temporarily storing screws during home appliance or electronics repairs. Simply arrange the compartments' positions and quantities according to the screws' locations and sizes.

磁吸螺丝盒，Magnetic Screw Organizer

by user_981038080 · original on MakerWorld ↗

♥ 0⬇ 0🖨 0 prints

Print profiles

• 0.2mm 层高, 2 层墙, 15% 填充

  ⏱ 1h 5m · 43 g · 4 material(s) · needs AMS

  Prints on: X2D 0.4PLAPLAPLAPLA

  Not printable on our printers