U.E. SANT ANDREU HOODIE PEN HOLDER - 3D PRINTABLE FILE THIS WAS A HARD ONE TO GET RIGHT. IT WAS REQUESTED BY @rosu , HOPE YOU, YOUR SON AND ALL THE FANS OF SANT ANDREU LIKE IT. JUST SOME INFORMATION BEFORE ANYONE DARES TO PRINT THIS. THE ACTUAL HOODIE TAKE AROUND 70grs OF FILAMENT BUT WILL HAVE A TOTAL WASTE OF AROUND 330grs BETWEEN SUPPORTS, POOPS AND PURGE TOWER . SO BE ADVICED. I WOULD RECOMMEND PRINTING 2 OR 3 ON THE SAME BUILT PLATE TO DIVIDE WASTE. ALSO, IT TAKES 5 COLORS TO GET IT RIGHT , SO IF YOU CAN´T PRINT WITH 5 COLORS ATTHE SAME TIME, YOU´LL NEED TO CHOOSE WHICH COLOR YOU WILL ELIMINATE. AL THAT SAID, THE PEN HOLDER STANDS 11cm TALL AND IF YOU WANT YOU CAN UPSCALE AS WISHED. I DON´T RECOMMEND DOING IT SMALLER BECAUSE OF THE AMOUNT OF DETAIL. ENJOY!

U.E. SANT ANDREU HOODIE PEN HOLDER

by MIKESATOS · original on MakerWorld ↗

♥ 4⬇ 0🖨 0 prints

License: MakerWorld Exclusive Licensefutbolfootballsoccerspainespanaofficeoficinaorganizadororganizereleganteleganteunicouniqueusefulutildecorativedecorationdecorativodecoracionportalapiceslapiceraslapiceroslapicerobiromemarcadoresfibronespincelesherramientasholderpenpencilmarkerbrushtool

Print profiles

5-COLOR-PEN-HOLDER-0.2mm layer, 2 walls, 8% infill
⏱ 26h 35m · 425 g · 5 material(s) · needs AMS
Prints on: A1 0.4, X1 Carbon 0.4, A1 mini 0.4, H2S 0.4, H2D Pro 0.4, X1E 0.4, H2D 0.4, P2S 0.4, H2C 0.4, A2L 0.4, P1S 0.4, X1 0.4, X2D 0.4, P1P 0.4PLAPLAPLAPLAPLA
Not in stock