Think your printer is tuned to perfection? Put your printer's precision, cooling, and extrusion limits to the ultimate test with this Micro 3DBenchy Challenge ! Scaled down to a microscopic 0.82mm x 1.59mm x 1.27mm (with a volume of just $0.29\text{ mm}^3$), this model is designed for ultra-fine detail enthusiasts, nozzle testing, resin printing, or just a fun experiment to see how small your setup can actually go. 🎨 Features & Details Extreme Scale Challenge: Pushes nozzle diameter, layer heights, and cooling speed to their absolute hardware limits. Resin & FDM Friendly: Ideal for high-resolution 4K/8K/12K SLA resin printers, or FDM printers equipped with a $0.2\text{mm}$ or smaller nozzle. Community Benchmark: Compare your results with other makers to see who can pull off the crispest micro-print! 🖨️ Recommended Print Settings Printer Type: SLA / Resin recommended for best results (FDM requires a $0.2\text{mm}$ or $0.1\text{mm}$ nozzle) Layer Height: 0.01mm – 0.05mm (Use lowest possible layer height) Print Speed: Extremely slow (10 - 20 mm/s for FDM) to allow full cooling between tiny layers Cooling: 100% fan speed from layer 1 Supports: None needed (if bed adhesion is sufficient) or use a tiny raft/brim Did you manage to pull this off? Upload your microscope or macro-lens photos in the reviews—I’d love to see your printer's limits!

Micro 3DBenchy Challenge (0.8mm Micro Scale)

by Helios 3d · original on MakerWorld ↗

♥ 0⬇ 4🖨 0 prints

License: BYbenchy3dbenchymicrotorturetestprintertestbenchmarkminiaturemicrobenchychallengeresinslaprecision02nozzleboatcalibrationtinyfidgetmodelplaprint3dprinting

Print profiles

0.25mm layer, 2 walls, 10% infill
⏱ 6m · 1 g · 1 material(s)
Prints on: A1 mini 0.4, H2D Pro 0.4, P1S 0.4, A2L 0.4, H2S 0.4, H2D 0.4, H2C 0.4, X1 Carbon 0.4, P2S 0.4, X2D 0.4, P1P 0.4, X1 0.4, X1E 0.4, A1 0.4PLA
Not in stock