Rainbow Key Holder – every key gets a spot, every wall gets a smile. A retro-rainbow entryway organizer that keeps house keys, car fobs and lanyards exactly where you will find them. Four round-tipped pegs hold the key rings, the layered rainbow sits above them. Hang it by the door, gift one for a housewarming, or hang two side by side for a busy family. SIZE · Plate: 240 x 140 mm, 4 mm thick · Total depth with pegs: 43.8 mm · 4 pegs, 8.3 mm diameter · 2 mounting holes, 4.15 mm (for 4 mm screws) · Needs a bed of at least 240 x 140 mm (does not fit the A1 mini) COLOURS · 4 colours in the 3MF: white plate, red and yellow rainbow, black pegs · Multi-colour needs an AMS; without one, print it in a single colour · Swap the arch colours for your own palette PRINTING · Material: PLA · Layer height: 0.20 mm · Walls: 2 perimeters · Infill: 15% grid · Supports: not needed (prints flat, pegs pointing up) · Nozzle: 0.4 mm · Brim: auto brim · Sliced and tested on: Bambu Lab A1 MOUNTING · Two screws through the top corner holes, or strong double-sided mounting tape on a clean, smooth wall Let the part cool completely on the plate before removing it. LICENCE Free for personal use. Print it, modify it, give it as a gift. Please do not re-upload the files or sell printed copies. If a part does not fit or a setting does not work on your machine, tell us in the comments. We read every one and we answer. Boost costs you nothing and helps the model reach people who need it.

Rainbow Key Holder – Entryway Wall Hook

by FormViva · original on MakerWorld ↗

♥ 0⬇ 1🖨 0 prints

License: Standard Digital File Licensekey holderkey hookkey rackrainbowrainbow decorwall hookentrywayentryway organizerhallwaywall mountkey hangerhome organizationhousewarming giftmulticoloramsretro decorkids roomno supports

Print profiles

0.2mm layer, 2 walls, 15% infill
⏱ 2h 29m · 104 g · 1 material(s)
Prints on: A1 0.4, H2S 0.4, H2D 0.4, A2L 0.4, H2D Pro 0.4, P2S 0.4, H2C 0.4, X2D 0.4PLA
Not printable on our printers