PRINTING INFORMATION: This design DOES REQUIRE SUPPORTS for the best printing results, especially around the raised platform, arms/hands, knife, and other overhanging areas. Supports Required: YES Recommended: Tree/Organic Supports Layer Height: 0.16–0.20 mm Infill: 10–15% Walls: 3 recommended Print slower around detailed areas for a cleaner finish

Scream Candle Holder

by DiamondCustom · original on MakerWorld ↗

♥ 224⬇ 103🖨 64 prints

Print profiles

• 0.2mm layer, 2 walls, 15% infill

  ⏱ 21h 2m · 385 g · 3 material(s) · needs AMS

  Prints on: P1S 0.4, H2D 0.4, H2S 0.4, X2D 0.4, A2L 0.4, A1 mini 0.4, H2C 0.4, X1E 0.4, P1P 0.4, P2S 0.4, H2D Pro 0.4, X1 Carbon 0.4, X1 0.4, A1 0.4PLAPLAPLA

  Not in stock