Storm Scout Sprite from Fortnite. AMS is optional. The model is split into parts, so you can print one piece at a time by manually changing colors. I used Geeetech Silk PLA, but the resulting color is unpredictable. Check out my other Fortnite sprites: https://makerworld.com/collections/30251990 Supports are needed. When assembling, make sure you hear the final click, as you may have to press VERY hard to finally snap the parts in place. You may also have to slightly sand or cut off the edges of the bases of some parts so they can fit properly.

Storm Scout Sprite (Optional AMS) from Fortnite

by Ryklss · original on MakerWorld ↗

♥ 67⬇ 45🖨 65 prints

Print profiles

• A series - 0.2mm layer, 2 walls, 15% infill

  ⏱ 1h 19m · 26 g · 3 material(s) · needs AMS

  Prints on: A1 0.4, A2L 0.4PLAPLAPLA

  Not printable on our printers

• Print by Plate (One color per plate)

  ⏱ 1h 33m · 26 g · 3 material(s)

  Prints on: A1 mini 0.4, H2D Pro 0.4, H2D 0.4, H2C 0.4, X2D 0.4, X1 Carbon 0.4, A2L 0.4, X1E 0.4, P1P 0.4, A1 0.4, P1S 0.4, P2S 0.4, H2S 0.4, X1 0.4PLAPLAPLA

  Not in stock

• P, X & H series - 0.2mm layer, 2 walls, 15% infill

  ⏱ 1h 11m · 26 g · 3 material(s) · needs AMS

  Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4PLAPLAPLA

  Not printable on our printers