Onigiri Sprite from Fortnite. AMS is optional. The model is split into parts, so you can print one piece at a time by manually changing colors. Check out my other Fortnite sprites: https://makerworld.com/collections/30251990 Supports are needed. When assembling, make sure you hear the final click, as you may have to press VERY hard to finally snap the parts in place. You may also have to slightly sand or cut off the edges of the bases of some parts so they can fit properly.

Onigiri Sprite (Optional AMS) from Fortnite

by Ryklss · original on MakerWorld ↗

♥ 59⬇ 51🖨 89 prints

License: Standard Digital File Licensefortniteonigirispritevideogamecharacterfnfortnite spritesspritestoykidsminiaturefastquickprintFastfast printeasyprintEasyPrintgamingamsconsolepcbattlepassfigurefigurinetoyschildrengiftgamescutebuddytagtrinketnoamsNOAMSno amsNO AMSspiritespiritughostminiMiniMINIA1a1a1 miniA1 MINIA1 Minicompatible

Print profiles

A series - 0.2mm layer, 2 walls, 15% infill
⏱ 1h 29m · 22 g · 3 material(s) · needs AMS
Prints on: A1 0.4, A2L 0.4PLAPLAPLA
Not printable on our printers
Print by Plate (One color per plate)
⏱ 1h 41m · 21 g · 3 material(s)
Prints on: A1 mini 0.4, P1S 0.4, X1 Carbon 0.4, X1 0.4, P2S 0.4, P1P 0.4, A2L 0.4, H2D Pro 0.4, H2D 0.4, H2S 0.4, X2D 0.4, X1E 0.4, A1 0.4, H2C 0.4PLAPLAPLA
Not in stock
P, X & H series - 0.2mm layer, 2 walls, 15% infill
⏱ 1h 17m · 22 g · 3 material(s) · needs AMS
Prints on: P1S 0.4, P1P 0.4, X1 0.4, X1 Carbon 0.4, X1E 0.4PLAPLAPLA
Not printable on our printers
With Cheeks - PrintByPlate
⏱ 1h 51m · 22 g · 4 material(s)
Prints on: A1 mini 0.4, H2S 0.4, P1P 0.4, P2S 0.4, X1 Carbon 0.4, P1S 0.4, A1 0.4, X1 0.4, A2L 0.4, X2D 0.4, X1E 0.4, H2D 0.4, H2D Pro 0.4, H2C 0.4PLAPLAPLAPLA
Not in stock