Necromancer Mask & Crown Unleash your inner dark ruler with the Necromancer Crown with integrated Skull Mask ! Perfect for cosplay, Halloween, or as an epic display piece for your gaming room. ⚠️ Please Note (Update after Test Print): I made a few minor adjustments and improvements to the 3D model after printing the grey prototype shown in the pictures. The final files provided here are even more refined! Because of this, I would highly appreciate it if you could post your makes and upload photos of your printed results . I am looking for fresh reference pictures to showcase the final model here on the page! 📌 Printing Recommendations & Settings Scale: 👤 IMPORTANT: You must scale the model to fit your own head size. Measure your head circumference before slicing to ensure a perfect fit! Supports: Tree supports are highly recommended for the crown spikes, eye sockets, and jaw details. Infill: 10% - 15% (Gyroind infill works great for strength while keeping it lightweight). Walls/Perimeters: 3 perimeters for optimal durability. Orientation: Print it upright for the cleanest surface finish on the crown details, or tilt it slightly backward to minimize overhang supports on the face.

Krone mit Maske - Totenbeschwörer [Tragbar]

by Ogi3D · original on MakerWorld ↗

♥ 1.2k⬇ 378🖨 157 prints

Print profiles

• Without crown in the back

  ⏱ 14h 31m · 375 g · 1 material(s)

  Prints on: P2S 0.4, H2S 0.4, H2C 0.4, H2D Pro 0.4, A2L 0.4, H2D 0.4, A1 0.4, X2D 0.4PLA

  Not printable on our printers

• With Crown in the back

  ⏱ 15h 9m · 381 g · 1 material(s)

  Prints on: P1S 0.4, X1 Carbon 0.4, H2D Pro 0.4, X1 0.4, X2D 0.4, H2S 0.4, X1E 0.4, A1 0.4, A2L 0.4, H2D 0.4, P2S 0.4, H2C 0.4, P1P 0.4PLA

  Not printable on our printers