Bring the magic of Pokémon to life with this Scorbunny kit card ! This model prints flat and transforms into a fully assembled ~70mm display figurine of Scorbunny that can stand on its own. Simply print, pop the pieces out, and assemble. Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS . Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 10 pieces. The small connectors are all throwaways Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Legs are labeled L,R for their position when looking at the model from the front (so L leg should go to YOUR left when facing the models' eyes) Back head piece has an F that should point towards the face so that the body side piece fits correctly. Assembly GIF below, though hopefully most pieces are self explanatory!

Pokemon #813 - Scorbunny kit card

by Kadis 3DR · original on MakerWorld ↗

♥ 167⬇ 89🖨 115 prints

Print profiles

• Framed AMS Version

  ⏱ 55m · 19 g · 4 material(s) · needs AMS

  Prints on: A1 mini 0.4, X1E 0.4, P2S 0.4, H2C 0.4, H2D 0.4, A2L 0.4, X1 Carbon 0.4, X2D 0.4, H2D Pro 0.4, P1P 0.4, H2S 0.4, X1 0.4, P1S 0.4, A1 0.4PLAPLAPLAPLA

  Not in stock

• Spares

  ⏱ 47m · 14 g · 4 material(s) · needs AMS

  Prints on: A1 mini 0.4, X1 0.4, X1 Carbon 0.4, A1 0.4, A2L 0.4, P1S 0.4, P1P 0.4, H2C 0.4, X1E 0.4, P2S 0.4, X2D 0.4, H2S 0.4, H2D Pro 0.4, H2D 0.4PLAPLAPLAPLA

  Not in stock