Rugged Stand with or without Gridfinity Base A sturdy phone and tablet / iPad stand with a diamond-lattice “rugged” front lip and a Gridfinity-compatible base so it drops into your modular desk setup. The front bumper uses an open diamond grid for, ventilation, and a premium look. The tablet sits in a shallow channel at a comfortable viewing angle. The underside follows the standard 42 mm Gridfinity grid so the stand locks onto a baseplate (magnets optional) or can sit standalone on a desk. Features Landscape viewing stand for 10–13" tablets (iPad Air / Pro 11" and similar; thicker cases may still fit depending on slot depth) Distinctive diamond lattice front lip — extra grip, less slippery than a smooth plastic edge Gridfinity base (designed around a multi-unit footprint so it is stable with a full-size tablet) Optional 6 × 2 mm magnet in the Gridfinity cells Clean, print-friendly geometry — no tiny unsupported features on the visible faces Works as a dedicated stand or as part of a larger Gridfinity desk / charging layout Suggested print settings Material: PETG or PLA Layer height: 0.2 mm Walls: 2-3 Infill: 15–20% gyroid or grid Supports: Usually none if printed with the base flat on the bed; add light supports only if your slicer flags the lattice or lip Orientation: Base down Optional: Slow outer walls on the lattice for a cleaner diamond pattern

Rugged Stand - Phones Tablets - Gridfinity Enabled

by K2_Kevin · original on MakerWorld ↗

♥ 77⬇ 105🖨 130 prints

Print profiles

• Rugged Stand (Two Styles)

  ⏱ 5h 15m · 111 g · 1 material(s)

  Prints on: X1 Carbon 0.4, H2D Pro 0.4, X1 0.4, X2D 0.4, P1S 0.4, P1P 0.4, A2L 0.4, A1 mini 0.4, P2S 0.4, H2C 0.4, X1E 0.4, H2D 0.4, A1 0.4, H2S 0.4PLA

  Not in stock