Lamp made up of 400 individual 3d printed parts, approximately 1000g filament and ~85h print time in total. The lamp assembly is attached to Ik3a hyby lamp frame. No glue required to assemble it. Assembly instructions with pictures are not present at the moment. Start by assemblying the outer frame ring, then attach ribs to the outer and inner ring. Mind that the ribs are two different models and there are never two identical next to one another. Then attach leaves, the biggest one outmost and then working around and inwards. I skipped the absolute bottom row in my build. NOTE, Hyby was recalled by ikea due to risks with the glass breaking or falling down! However, this is not glass, print and assemble at own risk!

400 Piece 3d Printed Hyby Lamp, NO GLUE

by Rigestam · original on MakerWorld ↗

♥ 54⬇ 12🖨 0 prints

License: Standard Digital File Licensehybytrippydiffractionleafleaf lampscale lampclicksnap fitno supports

Print profiles

0.12mm layer, 2 walls, 15% infill
⏱ 39h 27m · 517 g · 2 material(s) · needs AMS
Prints on: X2D 0.4, H2D Pro 0.4, H2D 0.4, H2S 0.4, H2C 0.4, A2L 0.4, A1 0.4, P2S 0.4PLAPLA
Not printable on our printers